5,68 € Ex VAT
This 90 degree elbow end plate (DDA2) is used to create a return in a handrail at 90 degrees to terminate into a wall. To connect it to 42.4mm tube you must use 42.4mm internal joiner tubeclamps.
The outer diameter of the tubeclamp is 42.4mm, so it will fit inside all 42.4mm tube clamps.
| MORE INFORMATION | |
| Clamp size | Outside diameter range allowed : |
| A -26.9mm (3/4″). | 26-28mm. |
| B- 33.7mm (1″) | 32-35mm. |
| C- 42.4mm (1.1/4″). | 41-43mm. |
| D- 48.3mm (1.1/2″). | 47-49mm. |
| E- 60.3mm (2″). | 59-61mm. |
| Set Screw Size: | Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key |
| Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key | |
| External appearance: | industrial raw. |
| Corrosion protection: | a) hot-dipped galvanized |
| b) hot-dipped galvanized + electro-galvanized | |
| TUV approved: | yes |
| Weather resistance: | in & out. |
| Tube diameter | C42 |
|---|
Reviews
There are no reviews yet.