11,36 € Ex VAT
Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.
| MORE INFORMATION | |
| Clamp size | Outside diameter range allowed : |
| A -26.9mm (3/4″). | 26-28mm. |
| B- 33.7mm (1″) | 32-35mm. |
| C- 42.4mm (1.1/4″). | 41-43mm. |
| D- 48.3mm (1.1/2″). | 47-49mm. |
| E- 60.3mm (2″). | 59-61mm. |
| Set Screw Size: | Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key |
| Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key | |
| External appearance: | industrial raw. |
| Corrosion protection: | a) hot-dipped galvanized |
| b) hot-dipped galvanized + electro-galvanized | |
| TUV approved: | yes |
| Weather resistance: | in & out. |
| Tube diameter | D48 |
|---|
Reviews
There are no reviews yet.