2,25 € – 4,89 € Ex VAT
A versatile fitting, often used on slopes and staircases where the angle either varies or is unknown, and/or where there is a requirement for rails to be offset from uprights. Most commonly used with types 101 and 125 to mount sloping rails onto vertical uprights. The tube cannot be joined within the fitting.
3D DRAWING- send e-mail!
| MORE INFORMATION | |
| Clamp size | Outside diameter range allowed : |
| A -26.9mm (3/4″). | 26-28mm. |
| B- 33.7mm (1″) | 32-35mm. |
| C- 42.4mm (1.1/4″). | 41-43mm. |
| D- 48.3mm (1.1/2″). | 47-49mm. |
| E- 60.3mm (2″). | 59-61mm. |
| Set Screw Size: | Size A27, B34 using ¼” ISO 228 with ¼” (6.5mm) hex key |
| Size C42, D48, E60 using 3/8” ISO 228 with 5/16” (8mm) hex key | |
| External appearance: | industrial raw. |
| Corrosion protection: | a) hot-dipped galvanized |
| b) hot-dipped galvanized + electro-galvanized | |
| TUV approved: | yes |
| Weather resistance: | in & out. |
| Tube diameter | B34, C42, D48 |
|---|
Reviews
There are no reviews yet.